These bulbs labeled "7440" and will fit any 7443, 7444, 7505 bulbs style housings. They will fit any housing (DRL, fog light, reverse light, etc...) that is sized between 23mm - 29mm in opening diameter.
These LED reverse light bulbs will fit other applications, but in order to get maximum brightness they are slightly overdriven. This means that if they are used constantly for longer periods of time they may burn out and fail prematurely. Please keep this in mind when deciding how to use them. A standard 55w halogen headlight produces as much as 1,200 Lumen of light, and these LED bulbs produce 1,000 Lumen of light per bulb! These are incredibly bright! These bulbs work in any CANBUS application where the reverse bulbs are monitored - you will not get a Bulb Out Warning, or flickering, when used in any reverse light application on any vehicle. Plug and play, convenient and easy install method.
How to install:
Remove backup light bulb socket from tail light. Remove old incandescent light bulb. Plug in new High Output LED reverse light bulb wiring into old bulb socket. Gently insert green rubber grommet of new LED bulb into opening in tail light housing for reverse light. Push/twist new bulb gently until fully seated in tail light housing. Test function before re-assembly.
- Universal Rubber Grommet Fitment, fits any hole opening between 23mm - 29mm
- LED Color: 6,000K
- Raw Lumen Per Bulb: 1,000
- Amp Draw: 1200±10mA at 14 VDC
Input Voltage: 9-18V DC
Lifespan: LED Chip Rated at 50,000 Hours
LEDs Used: x9 Seoul CSP Chips.
Cord Length: 2 Inches